Dayton 1RKT2 Operations Instructions download pdf (Page 3)

3

Assembly

ASSEMBLING THE WHEELED CART

Tools required:

(2) 7/16” socket or box wrenches

To position the handle at the

proper operating height:

Step 1:

Remove and retain all of the

hardware securing the legs to the

handle.

Step 2:

Raise handle until holes in handle

match the upper holes in the legs.

Step 3:

Re-install the hardware as shown in

Figure 3, and fasten securely.

ASSEMBLING THE OPTIONAL WALL /

CEILING MOUNT KIT

FALLING OBJECTS

HAZARD

Serious injury or death may occur. Read

and follow all safety information and

instructions on pages 2 and 3.

Tools required:

(2) 3/4” socket or box wrenches

Parts required:

The two (2) screws required to secure

wall/ceiling bracket to a suitable surface

(not supplied), must be 5/16” bolts and

flat washers.

Step 1:

Remove the wing knobs and remove

the housing from the cart.

Step 2:

Install side rotating stop over bolts

and into curved slots as shown in

Figure 3, on each side of the heater.

Step 3:

Assemble hanger to heater as per

Figure 3. This step requires no tools.

Step 4:

Secure mounting bracket to a surface

that can support a minimum of 120

continuous pounds.

Step 5:

Attach heater to bracket using the

desired option shown in Figure 4 on

page 5.

Models 1RKT2, 1RKT3, 1RKT4, 1RKT5, 1RKT9 and 1RKU2

Dayton Operating Instructions and Parts Manual

Figure 3 – Features

Hanger Assembly

Cart Assembly

Hanger

Steel Washer

Knob

Rotating Stopper

Packing

Support

Bolt

Packing

Steel Washer

Handle

Steel Washer

Knob

Steel Washer

Nut

Wheel Shaft Cap

Steel Washer

Wheel

Wheel Shaft

Support Cushion

Pin

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments