Dayton 2LKR9 Operations Instructions download pdf (Page 3)

Assembly (Continued)

4. Locate eyeshield in desired position

for protecting operator and secure all

knobs and bolts.

5. Mount right eyeshield assembly in a

similar manner.

DUST COLLECTOR HOSE

A dust collector hose has been provided

with grinder. Slide hoses onto sides of

T-connector and flanges. Mount the

hose by sliding the flanges at each end

over the exhaust ports on the left and

right wheel guards. Attach 2½” shop

vacuum hose to collector hose. Be sure

hose is mounted securely.

Be sure to empty

shop vacuum of all

flammable material (flammable liquids

and vapors, paper, wood, plastic, etc.)

before connecting vacuum to grinder.

Hot sparks from grinder may ignite

flammable materials in shop vacuum.

OPTIONAL LIGHTED EYESHIELD

(MODEL 6X854)

Position eyeshield bracket assembly

over bosses provided on wheel guard.

Bosses are tapped to receive two 1/4”-

20 screws. Fasten bracket assembly to

wheel guard with two screws provided

with eyeshields.

Installation

MOUNT GRINDER

1. Mount grinder to a solid horizontal

surface (hardware not provided). If

mounted to metal pedestal, align

mounting holes with corresponding

holes in pedestal. Insert a 1/4-20 x

1¼” hex head bolt with flat washer

through base of grinder. From bot-

tom of pedestal, place a 1/4” flat

washer and 1/4”-20 hex nut onto the

bolt. Tighten only until space

between grinder base and pedestal is

1/8” (base should be flush for 2LKT2).

Using second nut on each bolt, jam

tighten against the first to prevent

loosening by vibration.

2. To mount grinder to wooden bench

top, use 1/4 x 1¼” wood screws with

flat washers beneath heads. Tighten

screws until space between grinder

base and bench top is 1/8” (base

should be flush for 2LKT2).

GROUNDING INSTRUCTIONS

Improper connection

of equipment

grounding conductor can result in the

risk of electrical shock. Equipment

should be grounded while in use to pro-

tect operator from electrical shock.

Check with a qualified electrician if

grounding instructions are not under-

stood or if in doubt as to whether the

tool is properly grounded.

This grinder is equipped with an

approved 3-conductor cord rated at

300V and a 3-prong, grounding type

plug (See Figure 2) for your protection

against shock hazards.

Grounding plug should be plugged

directly into a properly installed and

grounded 3- prong grounding-type

receptacle (See Figure 2).

Do not remove or alter grounding

prong in any manner. In the event of a

malfunction or breakdown, grounding

provides a path of least resistance for

electrical shock.

Do not permit fin-

gers to touch the

terminals of plug when installing or

removing from outlet.

Plug must be plugged into matching

outlet that is properly installed and

grounded in accordance with all local

codes and ordinances. Do not modify

plug provided. If it will not fit in outlet,

have proper outlet installed by a

qualified electrician.

Inspect tool cords periodically, and, if

damaged, have repaired by an

authorized service facility.

Green (or green and yellow) conductor

in cord is the grounding wire. If repair

oracement of the electric cord or plug is

necessary, do not connect the green (or

green and yellow) wire to a live termi-

nal.

Where a 2-prong wall receptacle is

encountered, it must beaced with a

properly grounded 3-prong receptacle

installed in accordance with National

Electric Code and local codes and

ordinances.

This work should be

performed by a

qualified electrician.

A temporary 3-prong to 2-prong

grounding adapter (See Figure 3) is

available for connecting plugs to a two

pole outlet if it is properly grounded.

Do not use a 3-prong to 2-prong

grounding adapter unless permitted by

local and national codes and ordinances.

Models 2LKR8, 2LKR9 and 2LKT2

Dayton Operating Instructions and Parts Manual

Figure 3 – 2-Prong Receptacle

Grounding Lug

Adapter

3-Prong Plug

2-Prong

Receptacle

Make sure this

is Connected

to a known

Grounded

Receptacle

Figure 2 – 3-Prong Receptacle

Properly Grounded Outlet

Grounding Prong

3-Prong Plug

1 2 3 4 ... 24

Comments to this Manuals

Kristin 28 Feb 2025 | 17:21:32

need manual

Dayton 2LKR9 Operations Instructions Page 3

Comments to this Manuals