Dayton 1RVT8 User Manual download pdf (Page 10)

Dayton Installation, Operation, Maintenance and Parts Manual

Dayton Patio Heaters

1RVT7 and 1RVT8

WARNING

Heater Mounting

Improper suspension of the infra-red

heater may result in collapse and persons

being crushed. Always suspend from a

permanent part of the building structure

that can support the total force and

weight of the heater.

Failure to maintain minimum clearance to

combustibles may result in ﬁre and/or

explosion, property damage, serious

injury or death. Always maintain

minimum clearances and post signs or

provided tags (F/N: LL01) where needed. Signs should

state the hazards for the particular application and be

legible for the building occupants. Consult the factory or

a factory representative for additional information on

signage compliance.

The heater can be suspended with chains or rigid

threaded rod. Local codes, or conditions such as wind

drafts or other variables can cause movement of the

heater and may require rigid threaded rod. Avoid

excessive movement and/or vibration of the gas

connection by rigidly mounting the heater. The heater

mounting brackets can be used in place of rigid

threaded rods (see Figures 2.5 - 2.6). Consult all

applicable codes before installation.

The heater must be level from side to side and can be

set at an angle between 0° and 30° from horizontal.

The gas connection and power cord must be located on

the lower side (see Figure 2.4).

Level end to end

The gas connection and

power cord must located

towards the lower side

of the heater (towards

the ﬂoor).

Mounting bracket

30°

End

Figure 2.4 - Heater Orientation

End

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Dayton 1RVT8 User Manual Page 10

Comments to this Manuals

Related products and manuals for Space heaters Dayton 1RVT8